Best Practices for Storing Lumber to Keep It Safe and Dry

Lumber is a valuable resource for construction and DIY projects. Proper storage of lumber is crucial to ensure that the wood stays in good condition and free from damage caused by moisture, insects or other environmental factors.

Types of Lumber Storage

There are three main types of lumber storage available: outdoor, indoor, and vertical.

Outdoor Storage

Outdoor storage can be used if you have no available space inside or need to store large quantities. However, when choosing an outdoor area for storing your lumber, it’s important to select a flat surface that isn’t prone to flooding. You should also cover the stack with waterproof tarp or plastic sheeting material.

Indoor Storage

The best indoor location for wood storage would be in a dry room at moderate temperatures without much humidity variation. The temperature range must remain between 40-70 degrees Fahrenheit with low humidity levels – below 60%. The ideal indoor site will prevent direct exposure to sunlight which can cause discoloration over time.

Vertical Storage

Storing lumber vertically can save space while still providing adequate air circulation around each board’s surfaces preventing any formation of mold due to moisture accumulation underneath them. When positioning boards like this make sure that they don’t lean against anything since they may bow under their own weight and deform over time

Tips on Storing Wood Safely

Here are some steps you need to take when storing your lumber safely:

Select Fresh Lumber:

If possible purchase fresh-cut timber directly from sawmills as soon as possible after production so it has not been exposed too long outside where elements could degrade its quality before arrival at home yard or job site.

Dry Before Storing:

Before stacking newly cut wood planks together, allow them to dry at least 24 hours in a place exposed to air movement. Leave a gap of one inch between each board to improve circulation and let the wood breathe.

Keep It Off The Ground:

Placing lumber on concrete or dirt can cause moisture build-up leading to rotting. Use pallets or wooden blocks where possible for support lifted off the ground will prevent any water from seeping into timber below.

Covered Storage:

Cover your stack with waterproof tarpaulin material or plastic sheeting that extends beyond the edges by several inches since rainwater can reach underneath causing mold growth over time from trapped humidity.

Frequently Asked Questions

Here are some frequently asked questions about storing lumber:

How long can you store untreated lumber?

The length of time depends on how well it is protected against moisture and insects. You should aim for six months as an average storage period if kept inside under optimal conditions.

Can I store plywood outside?

If you must use outdoor storage make sure that you cover surfaces completely so they stay safe against elements like sun, rain, snow, etc., which could damage exposed areas quickly without proper protection provided by tarps or other weatherproof materials available commercially designed specifically for this purpose.

Closing Thoughts

Storing your lumber properly is crucial in ensuring its longevity and quality performance when used in construction projects but also saves money spent unnecessarily replacing degraded materials due to poor storage handling practices. Follow these guidelines carefully and enjoy perfect results every time!

Share this post: